CE-2.0 National Connector Standards
Standards and Projects
Found 442 matches:
| -- BDS PRINTED BOARD CONNECTORS |
| -- GEN. SPEC. FOR PRINTED CIRCUIT BOARD |
| -- SECTIONAL SPEC: TYPE II COMPLIANT PINS |
| -- SECT SPEC: TYPE I COMPLIANT PINS OF ASSESSED QLTY |
| -- GENERIC SPEC: COMPLIANT PINS OF ASSESSED |
| -- TP-45 CONTACT RESISTANCE VARIATION |
| -- TP-34 ACTUATING LEVEL STRENGTH |
| -- GOLD INVESTIGATION PHASE I |
| -- Reaffirmation of 17 364 TP's |
| -- NECQ SEC. PWB BOARD TO BOARD CONNECTOR |
| -- RECTANGULAR CONNECTOR - BLIND MATE, SCOOP-PROOF |
| -- NECQ PWB CABLE TO BOARD CONNECTOR |
| -- INTERIM STD 2.5MM COMBUS CONNECTOR SPECIFICATION |
| -- IS - TP SOLDERABILITY-VAPOR REFLOW TECHN-CONNECTOR |
| -- SOLDERABILITY (VAPOR PHASE) FOR CON. |
| -- ASSESSMENT OF IDC TERMINATIN |
| -- NEW TP-63 MOLD GROWTH |
| -- EV TEST PLAN-FINISHES OTH THAN GOLD ON MIL-C-39029 |
| -- BDS - PRINT CIRC CONN ASSOC W/PROP GEN PC CONN SPC |
| -- GEN. SPEC. BACK PLANE IN NACQ FORMAT |
| -- RECTANGULAR CONNECTOR SUB-MINIATURE-BLIND MATE0, SCOOP-PROOF |
| -- CURRENT RATING VERIFICATION TEST PROCEDURE FOR ELECT CONNECTORS |
| -- TP-84 ASSESSING QUALITY OF USED THERMOPLASTIC MATERIAL |
| -- CORROSIVE ATMOSPHERE TEST NEW TP-61 |
| -- REVISION OF TP-17 |
| -- CURRENT TEMPERATURE RATING OF ELEC. CONNECTORS |
| -- NEW TP-53 |
| -- Included SP-1418 |
| -- NEW TP-55 FOR RS-364 |
| -- REVISION OF RS-297A) |
| -- SECTIONAL SPEC: TYPE III COMPLIANT PINS |
| -- DT SP 1.9 MM PITCH LOW FORCE TRAPEZOIDAL SHAPED I/O CONNECTOR |
| -- GEN. SPEC. FOR PRINTED CIRCUIT BOARD IN IECO FORMT |
| -- CONNECTORS, RECTANGULAR, PLASTIC REMOVABLE PIN, SOCKET CONTACTS |
| -- SALT SPRAY CORROSION TEST FOR ELECTRICAL CONNECTORS |
| -- ADDITION TO EIA-364- PERFORMANCE CRITERIA SECTION -- ANNEX C |
| -- DET SP EXPANDED DIN (41612 TYPE C) HIGH SPEED BUS ARCHITECTURE |
| -- BLANK DETAIL STANDARD FOR CIRCULAR CONNECTORS |
| -- SECTIONAL SPECIFICATION FOR BACKPLANE STANDARDS |
| -- CONTACT FINISH EVALUATION TEST PLAN |
| -- MIC-C-39029 SLASH SHEETS |
| -- DETAIL SPECIFICATION FOR HIGH SPEED SERIAL (HSS) DB-9 CONNECTOR |
| -- GEN. SPEC. BACK PLAN IN IECQ FORMAT |
| -- TP-23C, LOW LEVEL CONTACT RESISTANCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS |
| ANSI/J-STD-006 -- REQUIREMENTS FOR ELECTRICAL GRADE SOLDER ALLOYS AND FLUXED/NON-FLUXED SOLDERS |
| CB-12 -- GOLD PLATING STUDY TEST REPORT |
| CB-13 -- X-RAY FLORESCENCE FOR MEASURING PLATING THICKNESS |
| CB-14 -- CONTACT LUBRICATION |
| EIA-198-3-4-F -- CERAMIC DIELECTIC CAPACITORS CLASSES I, II, III AND IV - PART III: DETAIL SPECIFICATION SHEETS - SECTION 4: RADIAL THROUGH-HOLE CAPACITOR, CONFORMALLY COATED AND MOLDED TYPES |
| EIA-270 -- TOOLS, WIRING-RECOMMEND PROCED-USER CERTIFICATION |
Next Page
Reset