P-9 Test Methods and Procedures
Standards and Projects
Found 38 matches:
| EIA-186-E SERIES -- 186-1E,2E,3E,4E,5E,6E,7E,8E,9E,10E,11E,12E,13E |
| EIA-325-A -- FLAMMABILITY TEST FOR ELECTRONIC COMPONENT |
| -- INTRODUCING A TEST METH IN RS-186 |
| EIA-186-1E -- METHOD 1: HUMIDITY (STEADY STATE) |
| EIA-186-10E -- METHOD 10: EFFECT OF SOLDERING |
| EIA-186-11E -- METHOD 11: THERMAL SHOCK IN AIR |
| EIA-186-12E -- METHOD 12: HEAT-LIFE |
| EIA-186-13E -- METHOD 13: INSULATION RESISTANCE TEST |
| EIA-186-2E -- METHOD 2: MOISTURE RESISTANCE (CYCLING) |
| EIA-186-3E -- METHOD 3: HUMIDITY (STEADY-STATE-SEALED CONTAINER) |
| EIA-186-4E -- METHOD 4: DIELECTRIC TEST (WITHSTANDING VOLTAGE) |
| EIA-186-5E -- METHOD 5: SALT SPRAY (CORROSION) |
| EIA-186-6E -- METHOD 6: MECHANICAL ROBUSTNESS OF TERMINALS |
| EIA-186-7E -- METHOD 7: VIBRATION FATIGUE TEST (LOW FREQUENCY, 10 TO 55 Hz) |
| EIA-186-8E -- METHOD 8: VIBRATION, HIGH FREQUENCY |
| EIA-186-9E -- METHOD 9: SOLDERABILITY |
| -- MICRO WETTING SOLDERABILITY TST |
| EIA-178 -- RESCINDED - NO LONGER AVAILABLE - REPLACED BY EIA-186-9E |
| EIA-186-10F -- REVISION OF EIA-186-10E |
| EIA-186-11F -- REVISION OF EIA-186-11E |
| EIA-186-12F -- REVISION OF EIA-186-12E |
| EIA-186-13F -- REVISION OF EIA-186-13E |
| EIA-186-14F -- REVISION OF EIA-186-14E |
| EIA-186-1F -- REVISION OF EIA-186-1E |
| EIA-186-2F -- REVISION OF EIA-186-2E |
| EIA-186-3F -- REVISION OF EIA-186-3E |
| EIA-186-4F -- REVISION OF EIA-186-4E |
| EIA-186-5F -- REVISION OF EIA-186-5E |
| EIA-186-6F -- REVISION OF EIA-186-6E |
| EIA-186-7F -- REVISION OF EIA-186-7E |
| EIA-186-8F -- REVISION OF EIA-186-8E |
| EIA-186-9F -- REVISION OF EIA-186-9E |
| EIA-186-F -- REVISION OF EIA-186E |
| EIA/IS-49 -- SOLDERABILITY TEST PROCEDURES |
| EIA-327-A -- SOLVENT RESISTANCE OF APPLIED MARKING MATERIAL |
| EIA-186-E -- STANDARD TEST METHODS PASSIVE ELECT COMPNT PART |
| EIA-186-F -- STD TEST METHODS PASSIVE COMPONENT PARTS-GEN INSTRUCTIONS/INDEX |
| -- VAPOR PHASE SOLDERING |