Home > Technology Center > Engineering Committees > CE-2.0 Committee

CE-2.0 Committee on National Connector Standards

AGENDA

MEETING NUMBER 29

CE-2.0 COMMITTEE ON CONNECTOR STANDARDS

Marriott Hotel
110-9 Avenue S.E.
Calgary, Alberta Canada T2G 5A6
403-266-7331

The CE-2.0 Committee on Connector Standards and its Subcommittees, Working Groups, and Special Task Groups will meet on June 5,6,& 7, 2001. The meeting will start at 8:30 AM on Tuesday, June 5 and conclude at 4:30 PM on Thursday, June 7 , 2001. Note: The meeting will run sequentially, with no specific time scheduled for the individual agenda items shown below. The Chairman may vary the sequence as needed. Members are requested to plan on attending the meeting for a full three days (early departures effect the completion of agenda work).

CE-2.0 AGENDA

1. Review and approval of previous meeting minutes.

2. Chairman's Report and Announcements (Bill O'Hirok)

A. SUBCOMMITTEE MEETINGS

CE-2.2 Circular Connector Specifications (Chairman: Al Davis)

CE-2.3 Rectangular Connector Spec.(Chairman: Carl Fritz)

CE-2.4 Printed Board Connector Spec.(Chairman: Rick Taylor, Vice Chairman: Carl Fritz)
STG-22-2.4 High Density Blade & Tuning Fork (Chairman: TBD)
PN4090 (Frank Ruffino/ Mary Freedman)

CE-2.5 Backplane Specifications
(Note: This subcommittee is currently inactive)

CE-2.6 Contact Specifications (Chairman: Dave Bouzek, Vice Chairman: Rick Taylo
PN on Compliant Pin Guidance Document (Chairman: Max Peel)

CE-2.7 Editing Subcommittee (Chairman: Carl Fritz)

CE-2.8 International Standards Subcommittee (Chairman: Jeff Toran)

W.G.-2.8.1 IEC Technical Advisory Group-TC 48 (Chairman: Jeff Toran)

B. WORKING GROUP (CE-2.0) MEETINGS

CE-2.0.1 Contact and Connector Plating (Chairman: Peter Willcox)

CE-2.0.3 Insulator Materials (Chairman: Frank Ruffino)

C. SPECIAL TASK GROUPS (CE-2.0) MEETINGS

STG-13-2.0 Terminology (Chairman: Rick Taylor)

STG-20-2.0 Space Requirements (Chairman: Charles Gamble Jr. )

STG-23-2.0 Current vs. Temp. Rise (Chairman: Max Peel)

3. CE-2.1 SUBCOMMITTE ON TEST PROCEDURES(Chairman Bill Peverill, Vice Chairman-Max Peel)
STG-15-2.1 on Low Frequency Shielding(Chairman Al Davis)
STG-33-2.1 on Electronic Signal Methods(Chairman: Jeff Toran)
STG-29-2.1 on Performance Criteria (Co-Chairmen: John Healy & Max Peel)

4. LIAISON REPORTS

A. DSCC (Including Army, USAF, Navy [except NAVAIR])-Rick Taylor

B. NAVAIR-Dwight Tabit

C. SAE-Dave Bouzek

D. ISO-Dave Bouzek

E. ASTM-Frank Ruffino

F. EIA CE-3.0-Harvey Waltersdorf

G. NASA-Charles Gamble Jr.

H. IICIT-Marty Freedman

5. New Business

6. Next Meeting

October, 2001 Cape Cod, MA

Bill O'Hirok-Chairman
Harvey Waltersdorf-- Vice Chairman
Bill Peverill-Secretary (wmpev@aol.com)

PROPOSED MEETING AGENDA-CE-2.1 SUBCOMMITTEE ON TEST PROCEDURES.
June 5-7, 2001-Calgary, Canada

1. Approval of the February, 2000 minutes

2. TEST PROCEDURE PROJECTS (BY PROJECT NUMBER)

SP-2426, TP-80, Low Frequency Shielding, (Al Davis/Jeff Toran)
SP-3801-A, TP-96, Plating Hole Integrity, (Jeff Toran)
SP-3988-A, TP-30A, Capacitance, (Jeff Toran/Carl Fritz)**
SP-4555-2, EIA 364D Basic Document, (Carl Fritz)*
SP-4829, TP-33A, Inductance 100nH-100mH, (Jeff Toran)
PN-4830, TP-69A, Inductance 10nH-100nH, (Jeff Toran)**
PN-4831, TP-109, Inductance 1nH-10nH, (Jeff Toran)
PN-4874, TP-04A, Normal Force, (Vince Pascucci)**
SP-4893, TP-16A, Stripping Force, (Carl Fritz)**
SP-4896, TP-62A, Terminal Strength, (Carl Fritz)**
SP-4897, TP-68A, Actuating Mechanism, (Carl Fritz)**
SP-4898-A, TP-78A, Cavity to Cavity Leakage (Carl Fritz)**
SP-4902, TP-52A, Solderability of Contact Termination
SP-4903,TP-56A, Resistance to Soldering Heat**
SP-4918, TP-58, Temp Life With Mechanical Loading
SP-4919-4, TP-51A, Ice Resistance
PN-4942, TP-60, General Methods for Porosity Testing

* Part of 1344/364 Harmonization Project. ** Hot-Past due for 5 year review

3. TEST PROCEDURES AWAITING PROJECT NUMBERS (BY TP NUMBER)

TP-12, Restricted Entry, (Rick Taylor)**
TP-15, Contact Strength, (Al Davis)**
TP-18, Visual Inspection, (Frank Ruffino)**
TP-29, Contact Retention, Vince Pascucci)
TP-31, Humidity, (Max Peel)
TP-32C, Thermal Shock, (Max Peel)
TP-41C, Cable Flexing, (Max Peel)
TP-48A, Metallic Coating Thickness, (Carl Fritz & Peter Willcox)
TP-55, Current Cycling, (Max Peel)**
TP-59, Low Temperature, (Frank Ruffino)**
TP-65A, Mixed Flowing Gas, (Max Peel/Vince Pascucci)
TP-75, Lightning Strike, (Al Davis)

TP-81, Combustability of Connector Housings, (Max Peel)
TP-82, Corrosivity of Plastics(Max Peel)**
TP-89, Space Applications, (Charles Gamble Jr. & Rick Taylor)
TP-XX, Dry Thermal Cycling, (Max Peel)

** Hot-Past due for 5 year review

4. STG Reports
STG-15-2.1 Low Frequency Shielding Effectiveness-Al Davis/Jeff Toran
STG-29-2.1 Performance Criteria(EIA-364-1000.01)-John Healy and Max Peel
STG-32-2.1 Electronic (Signal) Test Methods-Jeff Toran

5. New Business

CE-2.1 Committee Members

Bill Peverill - Chairman
Max Peel - Vice Chairman
Jeff Toran - Secretary
Bill O'Hirok
Frank Ruffino
Peter Willcox
Carl Fritz
Dwight Tabit
Tim Kepley
Al Davis
Dave Bouzek
Rick Taylor
Ed Sproles
Vince Pascucci
Greg Brown
Geoff Booth
Treve Smith
Steve Hanak
Trenor Williams

CE-2.3 Subcommittee For Rectangular & Trapezoidal Connectors

June 2001
Calgary, Canada

Proposed Agenda

1. Approval of the minutes of the 27 February 2001 meeting in San Diego, CA

2. Active projects

A. EIA-616, (PN-4644): Future Bus Connector (Chairman: Carl Fritz)

B. HSSDB9 Connector (SFF Committee document number 8480 (Sponsor: Frank Ruffino)

C. SCA2 Connector Variation (SSF Committee document number 8073) (Sponsor: Frank Ruffino)

D. ARINC Report (Giorgio Caioli)

New Details Specifications for the D-subminiature

Feedback from ARINC on the Guidelines on Working Relationship between AEEC (Airlines
Electronic Engineering Committee) and EIA

3. New business

4. CE-2.0 committee approval of the actions taken by the subcommittee

5. Adjournment.

EIA CE-2.7 Subcommittee on Editing

June 2001
Calgary, Canada

Proposed Agenda

1. Approval of the minutes - 27 February 2001 meeting in Orlando, FL.

2. Give an update on the progress of the editing committee activities.

3. General discussion.

4. New Business.

5. CE-2.0 committee approval of the actions taken by the subcommittee

6. Adjournment.

Subcommittee CE-2.6

Contact Specification

Agenda

Approve minutes from prior meeting.

General Discussion

· Review PN on Compliant Pin Effort.
· Review and Discuss SAE Project: High Strength Nickel Plated Wire.

New Business.

Adjournment.

Chairman: David Bouzek
Phone: (310) 536-9370 Ext. 3599
Fax: (310) 536-9322
david.bouzek@tri-starelectronics.com

Vice Chairman: Rick Taylor

CE-2.2 Circular Connector Committee- AGENDA
June, 2001, Calgary, Canada

1. Approval of minutes

2. Detail Specification for insert arrangements for the Reverse Bayonet Connector

3. Detail Spec for the Reverse Bayonet Connector

4. Part number structure for the reverse Bayonet Connector

5. Detail specification got a Quick Disconnect Space Application Connector

6. Enhanced MIL-DTL-38999 Plug Connector for Aircraft Engine Market

7. New Business

Top